RaptorMount repowers on your existing trackers. NatureMount follows the terrain on greenfield sites: high density, no heavy civils, no major road upgrades. Our system transforms plant economics and capacity factors.
The 1AP Silicon Bus puts conversion and storage on one simplified bus, replacing the solar + BESS + interconnection stack. Two times the energy density and eighty percent lower maintenance expense.
One control plane across generation, storage, conversion and load. A fault does not become your outage, because our system routes around it. 99.9% availability, 8+ hours UPS-conditioned.
Kern County, CA · existing tracker rowsYou already hold the land, the permits and the interconnection. We rebuild the plant on top of them: the fastest route to more power there is.
| Today | With 1AP | Change | |
|---|---|---|---|
| Energy to grid | 282,148 MWh | 580,000 MWh | +106% |
| Annual capacity factor | 32.9% | 63% | +91% |
| Generation per acre | 672 MWh | 1,291 MWh | +92% |
Jack County, TX · wind and solar on one siteYour operating wind site becomes near-baseload. Same land, same interconnection, dispatchable output straight through the summer peak.
| Today | With 1AP | Change | |
|---|---|---|---|
| Total clean energy | 354,747 MWh | 635,698 MWh | +84% |
| Annual capacity factor | 36% | 66% | +84% |
| ERCOT summer-peak CF | 20% | 85% | +325% |
Duval County, TX · NatureMount on terrainGround-up and sited to your load. Behind the meter or in front of it. 100MW-scale power in twelve months, configured to your demand curve.
| Today | With 1AP | Change | |
|---|---|---|---|
| Annual production | 1,071,360 MWh | 2,433,279 MWh | +127% |
| Annual capacity factor | 31% | 57% | +84% |
| Seasonal range | 20–41% | 37–76% | +85% |
100MW-scale power in 12 months. Factory built, plug & play deployment. Configure and expand to match load, BTM & FTM.
8+ hour UPS-conditioned power. 99.9% reliability. 2x energy density. Self-healing and data center ready.
80% lower energy loss. 80% lower maintenance expense. Lower LCOE, higher-value power.
| 1AP | Gas (peaking) | New gas (CCGT) | US nuclear | Other solar + storage | |
|---|---|---|---|---|---|
| Utilization (capacity factor) | 50–65% solar 75–95% solar+ | 10–15% | 55–65% | 29–93% | 20–35% |
| Reliability (availability) | 99.9% | 94–98% | 85–94% | 91–93% | 98% |
| LCOE ($/MWh) | $50–90 | $149–251 | $90–120 | $141–220 | $50–131 |
| CAPEX ($/MWac at POI) | $2–3M | $1M | $2–3M | $5–15M | $2–3M |
| Speed (permit + install) | 1–2 yrs | 2–3 yrs | 5–7 yrs | >15 yrs | 2 yrs |
A repower takes about six months. A new system takes about twelve. Our system is built and tested in a factory and arrives as one connected unit, so field work is assembly rather than construction. Tell us your load, your site and your date, and you'll get a layout, a budget and a schedule.
You get one system, one contract, one commissioning and one service relationship, not seven vendors and warranties to reconcile when performance falls short. Site control, permitting and the interconnection application stay with you or your developer; we design the plant to fit what you hold, and on a repower project we are designing to your existing interconnection. Operations and maintenance run against the whole system under a single agreement rather than component by component.
Faults are isolated, not propagated. In a conventional plant the wiring is combined before it reaches the inverter, so the system knows a fault exists but not where it is, and diagnosis becomes a field search across thousands of connections. We put intelligence at the string level: the plant sees each string on its own, shuts a failing one down, and reconfigures around it. One string is a hundredth of a percent of production. The system keeps running while the repair is scheduled.
Yes. This is the configuration our system was designed for. Power can move from our DC bus straight into your bus bar without touching the grid, which removes conversion stages, removes their losses, and delivers power already conditioned. The grid becomes a resource you draw on, not a dependency you wait for. In practice most sites are hybrid: we carry the large majority of your load, with grid or on-site backup covering the remainder according to local rules.